染料厂如何进行废气处理 -行业资讯- mg4355vip平台入口
全部新闻 当前位置:mg4355vip平台入口>行业资讯 > 正文
  • 染料厂如何进行废气处理
  • 本站编辑:mg4355vip平台入口发布日期:2019.10.20

 染料厂散发出的废气使得不少离工厂近的小区居民都难以忍受,污染周边环境,还危害车间生产员工身体健康。染料废气主要产生于各种染料产品的稀释工艺以及储罐呼吸孔的挥发。这些废气如果不进行废气处理对人身体影响很大,下面mg废气处理厂家就来为大家介绍染料厂废气处理工艺方法有哪些。

 
 
 
 
  ​
 
  (1)水淋塔+等离子净化设备:用于处理含有烟尘、粉尘、酸碱性废气的有机废气,水淋塔对废气进行预处理,气体进入水淋塔通过水洗除去气体中的烟尘、粉尘和酸碱性废气,剩余的有机废气被等离子净化设备净化,避免了废气对设备的损坏。
 
 
 
  (2)废气洗涤塔+活性炭吸附塔:适用于处理浓度低废气成分不单一的废气,通过废气洗涤塔可除去颗粒状的粉尘、烟雾、油脂类物质,经处理后的废气由活性炭吸附塔吸附,废气洗涤塔的作用在于净化废气防止颗粒状的物质阻塞活性炭吸附塔从而降低吸附效率;
 
 
 
  (3)水淋塔+UV光解净化器:水淋塔的作用与1中的作用相同,UV光解用于净化有机恶臭气体,能破坏三甲胺、硫化氢、甲硫氢、甲硫醇、甲硫醚、二甲二硫、二硫化碳和苯乙烯,硫化物H2S、VOC类,苯、甲苯、二甲苯的分子链结构,使有机或无机高分子恶臭化合物分子链。
 
 
 
  在高能紫外线光束照射下,降解转变成低分子化合物,如CO2、H2O等,利用高能UV光束还可以裂解恶臭气体中细菌的分子键,破坏细菌的核酸(DNA),再通过臭氧进行氧化反应,彻底达到脱臭及杀灭细菌的目的。
 
 
 
​以上就是mg废气处理厂家为大家分析的有关染料厂废气处理工艺方法有哪些的介绍,此外可以给大家提供参考。
 
 
 
杭州mg防腐设备厂产品生产工艺成熟、生产经验丰富、检测设备齐全,是一家集废气处理设备,有机废气处理,废气处理工程一体的专业废气处理公司。具有10多年有机废气处理、工业废气处理、废水处理的经验,受到诸多用户的信赖与好评!我们坚持以自主核心技术研发,质量求生存,科技求发展的战略,致力于打造环保设备的专业制造基地。
The waste gas emitted by the dye factory makes many residents in the community near the factory unbearable, pollutes the surrounding environment and endangers the health of the workers in the workshop. Dye exhaust gas is mainly produced from the dilution process of various dye products and volatilization of the breathing hole of the storage tank. If these waste gas do not carry on waste gas treatment to the human body is very important, the following shengda waste gas treatment factory to introduce the dye factory waste gas treatment process.
 
 
 
 
 
 
 
 
 
 
 
 
(1) water spray tower + plasma purification equipment: used to smoke, dust, acid, alkaline waste gas are dealt with organic waste gas, water spray tower for preprocessing of exhaust gas into water spray tower through water washing to remove smoke, dust and acid alkali waste gas in the gas, the rest of the organic waste gas by plasma purification equipment, purification, avoid the waste gas damage to equipment.
 
 
 
 
 
 
 
(2) the waste gas scrubber + activated carbon adsorption tower: suitable for processing low concentration gas composition is not a single exhaust gas, waste gas scrubber can get granular dust, smoke, grease, after processing the waste gas by activated carbon adsorption, adsorption tower flue gas scrubber role in purifying waste gas to prevent granular material blocking the activated carbon adsorption tower to reduce adsorption efficiency;
 
 
 
 
 
 
 
(3) water spray tower + UV photolysis purifier: the role of the action of the water spray tower and 1 is the same, UV photolysis is used to purify the organic fetor, can destroy trimethylamine, hydrogen sulfide, hydrogen sulfide and methyl mercaptan, methyl sulfide, dimethyl disulfide, carbon disulfide and styrene, sulfide H2S, VOC, molecular chain structure of benzene, toluene, xylene, organic or inorganic polymer odorous compounds molecular chain.
 
 
 
 
 
 
 
Under the irradiation of high-energy ultraviolet beam, the degradation is transformed into low-molecular compounds, such as CO2 and H2O, etc. The high-energy UV beam can also crack the molecular bonds of bacteria in odor gas, destroy the nucleic acid (DNA) of bacteria, and then conduct oxidation reaction through ozone to completely achieve the purpose of deodorizing and killing bacteria.
 
 
 
 
 
 
 
The above is shengda waste gas treatment factory for you to analyze the dye plant waste gas treatment process has what the introduction, in addition can provide you with reference.
 
 
 
 
 
 
 
Hangzhou shengda anticorrosive equipment factory is a professional waste gas treatment company integrating waste gas treatment equipment, organic waste gas treatment and waste gas treatment project. With more than 10 years of experience in organic waste gas treatment, industrial waste gas treatment, wastewater treatment, by a lot of users trust and praise! We adhere to the independent core technology research and development, quality survival, science and technology development strategy, committed to building environmental protection equipment professional manufacturing base.
0